PropFIX extra size layer (80 mm)

This extra size layer is not included in the standard PropFIX kit.

It is used to fix props with wider than 70 mm inner tubes.

SKU: 737.010 Category:

Description

PropFIX extra size layer for 80 mm formwork prop tube

  • Formwork prop minimal entrance hole diameter on the footplate – 39 mm
  • Prop inner tube maximum diameter – 80 mm (outer tube diameter – 84 mm)

To see how the PropFIX extra size layer is installed and how it works visit our Youtube channel and see the video: PropFIX extra size layer 80 mm VIDEO

This extra size layer is the additional accessory to the PropFIX tool kit.
The standard PropFIX tool kit consists of 3 extra size layer. They cover the diameters of the formwork prop tubes up to 76 mm. They are most common worldwide. Less often formwork rental parks have wider diameter formwork props that are wider then 76mm. For this reason there are several additional layers available. For bigger diameters you will need extra size layer 80mm, or 84mm or even a custom made layer made by your individual requirements. We always recommend to investigate all types of props in your formwork rental yard.  The measurements are important for deciding which items will be necessary to repair full range of diameters. Those numbers are:

  • Formwork prop minimal entrance hole diameter on the footplate – 39 mm. The head of the tool, which has to enter the prop from inside is 39mm.
  • Prop inner tube maximum diameter – 80 mm (outer tube diameter – 84 mm). This is the maximum reachable diameter of the tool with extra size layer 80mm.

Before starting to work with the extra size layer 80mm we recommend to watch the video PropFIX extra size layer 80 mm VIDEO to see how to attach it to the PropFIX tool it works. Until the user is advanced it will take a few more minutes to repair wider props using extra size layer 80mm.

 

 

 

Additional information

Weight 0.4 kg
Dimensions 0.7 × 1.6 × 2.3 cm